How to Maintain a Mixer Shower

Compared with other items in the home, shower mixers are easy to overlook. If you ignore it for a long time, the mix shower is particularly easy to be damaged, so you should also pay attention to the maintenance of the shower head during normal times. As a bath shower mixer supplier, we have summarized some methods specially for you, hope it can give you some help.

How to maintain a mixer shower?

1. Often remove small debris, many people will find that after a long time of use, there will be some water splashes that cannot be sprayed. Most of the reason for this is that there is some small debris in the shower mixer. At this time, the soft ring of the shower mixer can be rotated directly, and then the small debris in the shower mixer will be flushed out with the water flow.

1. Avoid strong acid cleaning If you want to maintain the shower head well, if it is usually scaled, do not use a strong acid solution to clean the shower mixer in this case. Because these strong acid solutions are particularly easy to corrode the sprinkler head, it is especially easy to damage the sprinkler head; if it is operated in this way for a long time. Therefore, it is best to use a relatively neutral detergent to clean the scale of the shower mixer.

1. Close the main water inlet valve. If the shower head is not used for a long time because of going out to play or other things, in this case, the main water inlet valve of the shower head must be closed, which can effectively avoid water stamping.

1. Avoid high water temperature when using it. If you want to use hot water, it is best to connect another pipe to put the hot water. Do not use the shower head to connect the hot water frequently. If it releases overheated water for a long time, it will accelerate the flower aging rate. Therefore, do not use it to put hot water unless it is necessary.

1. Do not twist the water pipe If you want to maintain the shower head, do not coil the water pipe under it; when you are finished using the shower head. If it is coiled for a long time, it is particularly easy to damage the water pipe. After use, just hang the shower head on the bracket, so that the water pipe will not be bent and coiled.

1. The non-removable shower head is blocked during the process of use, if it is a non-removable type of shower head, it is blocked at this time. In this case, you can directly take a needle, and then tie the blocked place the shower nozzle can be unclogged.

1. Properly clean the faucet of the faucet shower mixer after a long time of use, there will be some stains more or less. If you want to clean the faucet of the shower head, it is best to dilute the neutral detergent, and then wipe the faucet with a cloth. In this way, the stains on the faucet can be easily cleaned, and it will not cause corrosion to the faucet.

1. Gentle use If you want to maintain the shower mixer, in normal use, do not use too much force to pull the shower head, otherwise it is particularly easy to cause the connection of the shower head to fall off. As long as the shower head is used gently and gently, the service life of the shower head is still very long.

Last few words

If you are looking for a bath shower mixer supplier,shower mixer supplier, we hope we will be your best choice. For more information about outdoor shower fixtures, we are glad to answer for you.